The Ghost Immobiliser
Immobilisers are a potent tool in the fight against vehicle theft. They stop the vehicle from starting if it doesn't have an ignition key fob. They also work well to stop hotwiring and other traditional forms of vehicle theft. However, newer methods like key replication and relay theft are becoming more common.
To combat these latest trends, the ghost immobiliser works to make your vehicle undetectable. It is silent and stealthy and does not use radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device, connects with the CAN data network of your vehicle to stop key cloning and theft. It is a TASSA-approved product and insurance companies also endorse it. It operates quietly and is virtually unnoticeable to thieves. It makes use of buttons on your steering wheel and central console to create an individual pin-code sequence you must enter before you can start your car. You can create as many as 20 different sequences in order to increase security. The system is easy to install and does not require any additional hardware or wiring.
To get the most effective results It is recommended that you choose a reputable CAN-immobiliser installer who is specialized in your specific vehicle. Ideally, they will have a workshop close to you where you can go to complete your installation. They will also have a variety tools and equipment to aid you during the installation process. They will provide basic hand tools, multimeters, insulation tape, and heat shrink tubing for protecting connections. A user manual will provide instructions specific to the wiring of your vehicle.
Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. Double-checking the CAN L and H wires is vital, as incorrect identification can cause a misalignment of the system. It is also a good idea to mark the wires using small pieces of tape or label them with labels. Finally, utilize a multimeter for verification that the power source you have identified has a reliable 12V supply.
Advanced thieves employ various methods to evade the Ghost Immobiliser, which includes jamming and making false signals. These methods work by amplifying signals sent from the key fob to the electronic controller unit. With the latest anti-jamming technology and vigilant monitoring your vehicle will be protected from these sophisticated attacks.
Security enhancing
Ghost immobilisers offer an additional layer of protection to safeguard your car from theft. It uses a PIN security system that can be entered via buttons on your dashboard or steering wheel making it difficult for thieves to steal your car. The device is designed to be hidden in your vehicle. It does not have lights or other indicators to alert potential burglars to its presence. It communicates with your vehicle's ECU through the data bus, meaning it isn't susceptible to the same hacking and relay attacks that can disable traditional security systems.
The system is an excellent investment for those who own luxury vehicles, as they are at a greater risk of theft due to their worth and their popularity. Its security features are enhanced to protect against key copying, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers are also connected to apps, which means you can arm or disarm quickly. They may be equipped with a service/valet option that lets you temporarily disable the immobiliser while your vehicle undergoes repairs or maintenance.
Ghost immobilisers have another great feature that it doesn't require any cutting of wire. This is a fantastic feature, especially if the vehicle is more recent and doesn't have an immobiliser built in. Certain systems also work with GPS tracking devices, providing additional security to your vehicle. A GPS tracker could also lower your insurance costs. If you decide to purchase a ghost immobiliser make sure it is TASSA-verified and that a professional installer installs the device for you.
Compatibility with all major makes and models
The Ghost Immobiliser has been designed to work with all major makes and models of vehicles, safeguarding your pride and joy against theft. It uses buttons in your steering wheel, the centre console, or door panels to generate a unique pin code, which must be entered before you can drive your vehicle. The system is tamper proof, undetectable and backed by three-year guarantee. It is also fully accredited by insurance companies and insurance companies, which means it can lower your insurance premiums.
The Ghost system is different from standard immobilisers that use the key fob to provide ignition control. It is directly connected to the engine controller via the CAN bus. It is almost impossible to remove, disable or hack. In addition to this, the Ghost system can be linked with a secure iPhone application that allows remote monitoring and management.
You can create an PIN code that is easy to remember, but mathematically, it is impossible for thieves to figure out. You can modify and modify the PIN at any time to keep your vehicle secure even when it's located in a parking lot or on the street. You can also select a valet or service mode in case you require someone other than you to drive your car temporarily, for example when it's in garage for maintenance. This is an excellent way to stop your vehicle from being stolen by a shady mechanic. To give you more security you can choose a Ghost call alert that will notify you if your vehicle is moving or if it has been moved.
Convenience
The ghost immobiliser guards your vehicle from theft techniques like key relay or cloning. It works by connecting to the vehicle's CAN data network and blocking communication with the engine ECU. This makes it very difficult for thieves to hack or clone your vehicle.
After like this , you'll have to enter a PIN number up to 20 digits using the buttons on your dashboard and the steering wheel in order to start the engine. The system is completely concealed and unnoticeable to thieves because it does not emit any radio frequency signals. It can be configured with an PIN code that can be changed by the user, adding to its security. The system is also designed to stop cutting the circuit, making it virtually impossible to hack into.
If you do have a problem remembering your PIN, there are systems that let you communicate with the immobiliser through an app on your phone to disarm it immediately. Some systems also have a service/valet setting that allows you temporarily to start your car for instance, if you drop it off at valet or garage.
The Ghost Immobiliser is also undetectable to thieves as it does not transmit radio signals, a major advantage over other aftermarket vehicle security systems. Additionally, it is easy to use and doesn't require any wiring that is complicated. You can also use it together with a dash camera for added safety. This dash cam is Thinkware F70, which features clear and crisp HD 1080p dashcam footage as well as Format Free Technology and parking mode. The system can be wired to guarantee maximum performance and longevity.
Installation
It is essential to select the best immobiliser ghost to protect your car from thieves. This device will help to in preventing theft of your car by blocking communication between the engine controller unit (ECU) and key fobs. This device blocks thieves from stealing the signal used to start your vehicle. It also can detect when it has been tampered with and notify the owner of the vehicle.
The device is simple to install and can be used with the existing systems of your vehicle. It doesn't require any modifications to the wiring in your vehicle and can be tucked away in a hidden location, such as under the dashboard. Follow the directions in the manual to make sure that the device is properly installed. After installation, it's important to test the system. This will ensure the ghost of the immobiliser works as it should.
You can buy an Autowatch Ghost 2 immobiliser and have it installed by a reputable installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to remove the system or bypass it. Installation typically takes between 2 and 3 hours.
When installing the Ghost, it is recommended to look up the wiring diagram for the model of your vehicle. This will enable you to identify the CAN High & the CAN Low wires needed to connect your Ghost to the engine of your vehicle. It is also essential to double-check the connections to ensure that they are secure and insulated.
Once the installation is completed, you are able to start using the Ghost Immobiliser normally. It will disable the ignition of your vehicle in the event that it isn't started with the correct PIN code, which you can assign yourself. The ghost of the immobiliser can be changed to Service/Valet Mode in case you require your vehicle to be cleaned or valet parking.